Description
Moulds
Cube Mould: ZI 2016
These are available in different sizes and are made according to Indian and British standards. For the metric size cube mould, the faces are machined flat to +/-0.2mm accuracy and finished to within 0.2mm. For the inch size moulds, the faces are machined flat to +/-0.01 inched to within 0.01in. All moulds are supplied complete with base plate.
1) Mould Cast Iron, for 5cm, cube
2) Mould Gunmetal, for 5cm, cube
3) Mould Steel for 7.06cm cube with loose base plate.
4) Mould Cast Iron for 7.06cm cube with loose base plate
5) Mould Cast Iron for 10cm cube
6) Mould Cast Iron for 15cm cube
7) Mould Plastic 15cm
8) Mould Cast Iron, for 20cm cube
9) Mould Cast Iron, for 30cm cube.
Briquette Mould (Single): ZI 1026-A
IS 269 1958, BS12.,
For casting of cement briquettes for tensile strength tests. It is a two-part split mould made of gun metal. Two thumb screws facilitate easy and quick assembling and dismantling of the mould. The minimum cross section of the briquettes cast is 25.4 mm x 25.4 mm. Supplied complete with a steel base plate.
Briquette Mould (Three Gang) : ZI 1026-B
IS 269 1958, BS12.,
For casting three cement briquettes at a time for the tensile strength test on cement
Gang Mould (Three Gang): ZI 2026
BS 1881-108
Moulding of 40mm, 50mm, 100mm specimens. Manufactured from Mild Steel / Cast Iron / Bronze and supplied complete with base plate base
Cylinders
Beams
Beam Mould: ZI 2021
BS 1881-108
For casting, concrete specimen for flexure tests
Specification: Made of Cast Iron / Mild Steel. The mould are made of 4 plates assembled together. Each mould is supplied complete with base plate. Faces are machined flat to ± 0.2mm. And finished in size to 0.2mm.
ZI 2021: 10 CM X 10CM X 50CM
ZI 2022: 15CM X 15CM X 70CM
ZI 2023: 15CM X 15CM X 75CM
ZI 2024: 10CM X 15CM X 60CM
ZI 2025: 4CM X 4CM X 16CM
Three Gang Mould for Prisms
Shrinkage Bar Mould (Two Gang) : ZI 1016
Same as ZI 1015 but with Two compartments assembled on angle base plate
Shrinkage Bar Mould (Three Gang) : ZI 1017
Same as ZI 1015 but Three compartments
Shrinkage Bar Mould (Four Gang) : ZI 1018
Same as ZI 1015 but having Four Compartments.
Note: Bar mould as above but in gun metal as well as with knurled and threaded reference pins are also available. Spares: Stainless steel smooth or knurled and threaded reference pins as required. Supplied in Packs of one dozen.
Three Gang Mould for Prisms
Shrinkage Bar Mould (One Gang) : ZI 1015
IS 4031, 10086, ASTM C 227. & BS 1881.
The mould is used for casting specimens of cement & aggregate combinations for measuring the potential expansive alkali reactivity.
Specification: The mould, which has 25 mm x 25 mm x 250 mm, effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins.
Three Gang Cube Mould
Prism Mould Three gang (40.1x40x160mm) :
ZI 1029-B
IS 1727 1967, IS 4031 1968, ASTM C 394, C 64
It is supplied complete with base. All parts are marked with thei dentification number for correct assembly. Each mould is individually verified in the dimensional tolerances, hardness, squareness, flatness & roughness.
Jolting Apparatus
Jolting Apparatus: ZI 1029-A
IS 1727 1967, IS 4031 1968, ASTM C 394, C 64
For making standard rectangular specimens of 40 x 40 x 160mm. of Portland and pozzolana cement mortar for determining the transverse strength.
Specification: The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800 mm from the centre of the table. There is a projecting lug with a plane face on the upper face of the table beneath which is a stop with a rounded upper surface. The table can be raised and allowed to fall freely on the stop by a cam which is connected to a motor and gearbox through a V-belt an pulleys. The cam rotates at a rate of 60 Rev/Min. A stroke counter fitted with micro-switch is provided which stops the machine after 60 Jolts. Locating pins are provided for mounting the mould compartments on the table. The mould surmounted by the hopper can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation on 230 Volts, Single Phase, A.C. Supply. A Digital Preset Counter can be supplied at an extra cost.
Accessory:
(1) Steel mould with base plate having three compartments each having 40mm x 40mm x 160mm, internal
dimensions.
(2) Apparatus for de-moulding the specimen
Special plastic mould for production of specimens (Hakorit)
- Moulds are made of white special plastic (Hakorit),
- Very low wear and stiffened against bending, unbreakable
- Self-lubricated, easy to clean, rust free
- Light weight in comparison to steel mould
- Temperature for use Max. +80º C Min – 30º C.
Triple cube Mould
Part # HPM-C3-555
For production of 3 test specimens
Dimensions: 50X50X50mm
Triple cube Mould
Part # HPM-C3-151515
For production of 3 test specimens
Dimensions: 150X150X150mm
Triple cube Mould
Part # HPM-C3-101010
For production of 3 test specimens
Dimensions: 100X100X100mm
Double cube Mould
Part # HPM-C2-151515
For production of 2 test specimens
Dimensions: 150X150X150mm
Beam Mould
Part # HPM-B1-601515
For production of 1 test specimens
Dimensions: 600X150X150mm
- Beam moulds of other sizes are available
Three gang Mould
Part # HPM-B3-4416
For production of 3 test specimens
Dimension : 40X40X160
Three gang Mould
Part # HPM-B3-2365
For production of 3 test specimens
Dimension : 230X64X54mm
Six gang Mould
Part # HPM-B6-4416
For production of 6 test specimens
Dimension : 40X40X160
Triple Cylinder Mould
Part # HPM-CY3-55HD* & HPM-CY3-36HD**
for production of 3 cylinder test specimens
Dimensions: Diameter: 50mm Height:50mm*
Diameter: 36mm Height:36mm**
Test mould for square plates
Part # HPM-PL1-606010
For production of 1 test specimens
Dimension: 600X600X100
