Description
TILE ADHESIVE TAMT-300 Tile Adhesive For Interior and Exterior fixing of ceramics, glass mosaics and stone claddings in permanent submerged and high-risk conditions TAMT-300 Tile Adhesive TAMT-300 is a cement-based tile adhesive for thin or thick bed fixing of ceramic tiles in interior or exterior locations especially those exposed to permanently wet conditions, it is also suitable for fixing marble, stone cladding and brick slips of weight which should not exceed 40kg/m2 unless mechanical fixing is used, it is also suitable for use with glazed and unglazed tiles, terrazzo and suitably prepared timber. TAMT-300 is adhesive of choice for swimming pools and may be used in all wet process applications including shower room, institutional kitchens, bathrooms, abattoirs and high-risk cladding, it can be used to tile directly onto glazed tile surface and on high density and glass mosaic, the product can be used for fixing and grouting. TAMT-300 is waterproof, non- slip, ready for use just add water, high adhesive bond strength and exceeds British Standard requirements. Standards BS 5980 Part 10: 1980 ANSI A: 118.1 ANSI A.118.4 Packaging TAMT-300 available in 25kg bags TILE ADHESIVE FOR FIXING OF CERAMICS, MARBLE AND DECORATIVE CLADDING TAMT-400 TILE ADHESIVE TAMT-400 is a grey cementitious powder formulated high performance fixing adhesive for wide range of applications. Typically used for fixing ceramic wall and floor tiles, terrazzo, quarry tiles and stone cladding in internal applications. It can be used in high traffic conditions, kitchens, shower and wet process areas. For external application use TAMT-300 TAMT-400 is water resistant, easy to use, economical, fir walls and floors, ready for use just add water and high adhesive bond strength. Packaging TAMT-400 available in 25kg bags
